Why Spring is the Best Time to Replace Your Air Conditioner
March 24, 2023
More often than not, homeowners only replace their air conditioners when their old units have failed them. This tends to happen during the summer when we use our AC units constantly and depend on them the most. Unfortunately the summer months here in the Lowell, NC area is the busiest time of year for HVAC contractors, so you might have to wait a few days or weeks to schedule your AC replacement appointment. If your air conditioner is 10+ years old and not providing you with the comfort you want and need, you should replace it before the heat and humidity sets in – ideally in the early spring time.
Easier Scheduling
Like we mentioned above, the summertime is the busiest time of year for HVAC contractors here in the greater Lowell, NC area. If you know that you need an AC replacement, scheduling it in the spring is the best for not only you but your HVAC contractor. If you wait until the summer, you might have to wait a couple of days or even weeks to have your AC unit replaced. By scheduling in the spring, you can make your AC replacement appointment fit your schedule with ease.
Increased Energy Savings
A new air conditioning unit will operate more efficiently than your current old AC unit. Replacing your cooling system before heading into the warm summer months will lead to an increase in your energy savings and a decrease in your utility bill. You may be tempted to put off replacing your AC unit for another reason, but you’re running the risk of having it break down on you while also paying more to operate it.
Improved Comfort
Finally, replacing your AC unit in the spring time will result in improved comfort in the summer. A brand new energy-efficient air conditioner will operate and perform better than a 10+ year old air conditioner. If you are looking for ultimate cool comfort this summer, make sure to schedule your AC replacement appointment in the spring. To learn about some of the air conditioners we carry and install here at Native Air, Inc., check out our
products page
or give our Lowell, NC office a call today!
At Native Air, we know that your air conditioner is more than just a luxury during those hot North Carolina summers—it’s a necessity. But too often, homeowners unknowingly shorten the life of their AC systems through preventable mistakes. We’ve been in the HVAC business long enough to see the same issues over and over, and we’re here to help you avoid them. Here are five common mistakes that can significantly reduce your AC’s lifespan—and what you can do instead to keep your system running strong for years to come. 1. Neglecting Regular Maintenance Skipping annual tune-ups is one of the fastest ways to send your AC system to an early grave. Just like a car, your HVAC system needs regular care to run efficiently. Filters need to be changed, coils cleaned, and moving parts inspected and lubricated. What to do instead: Schedule professional maintenance at least once a year—ideally in the spring before the summer heat hits. At Native Air, we offer affordable tune-up services that can catch small problems before they become expensive breakdowns. 2. Closing Off Vents in Unused Rooms It might seem like a smart way to save energy, but closing vents actually puts more strain on your system. Your AC is designed to work with a balanced airflow. When you close vents, pressure builds up, which can damage the blower and reduce efficiency. What to do instead: Keep all vents open and unobstructed. If you’re looking to control temperatures in different areas, talk to us about installing a zoned system for more efficient climate control. 3. Ignoring Air Filter Changes We get it—changing your air filter isn’t the most exciting home task. But dirty filters block airflow, make your system work harder, and can lead to overheating or freezing up. What to do instead: Change your filters every 1–3 months depending on your home’s air quality, whether you have pets, or if someone in the house has allergies. It’s a quick and inexpensive way to boost efficiency and extend your AC’s life. 4. Installing the Wrong-Sized AC Unit Bigger isn’t always better. An oversized AC will cool your home too quickly, causing it to short-cycle (turn on and off frequently), which wears out components faster. An undersized unit will struggle to keep up and run nonstop, leading to burnout. What to do instead: Always consult with a licensed HVAC contractor (like us!) when choosing a new system. We’ll do a proper load calculation to ensure you get the right size for your home’s needs. 5. Delaying Repairs We’ve seen too many homeowners ignore strange noises, weak airflow, or rising energy bills—until the AC finally dies in the middle of a July heatwave. Small issues rarely fix themselves. Left unchecked, they snowball into big, expensive problems. What to do instead: If you notice something off, don’t wait. Call Native Air. We’ll quickly diagnose the problem and help you make an informed decision before your system takes a nosedive. Don’t Wait Until It’s Too Late Your air conditioner is one of the most important systems in your home. With the right care and attention, it can last 12–15 years or more. But neglect and simple mistakes can cut that lifespan in half. At Native Air, we’re here to help you protect your investment. Whether you need maintenance, repairs, or a brand-new system, we bring years of trusted experience to every home we service in Lowell and the surrounding areas. Need an AC check-up or have questions? 📞 Call us today at 704-312-8589 🌐 Or schedule service online
It’s the middle of another hot and humid summer here in Lowell, North Carolina, and your air conditioning system has probably been working overtime to keep your home comfortable. But is it up for the rest of the season? At Native Air, we’ve seen firsthand how small HVAC issues can turn into major breakdowns—especially during peak heat. That’s why mid-season AC maintenance isn’t just a good idea—it’s a must. Here are some expert tips to help you keep your system running smoothly for the rest of the summer and avoid costly surprises. 1. Check and Replace Your Air Filters Your system's air filter should be changed every 30–60 days, especially during heavy use in the summer. A clogged or dirty filter restricts airflow, forces your system to work harder, and reduces efficiency. Not only does this increase your energy bill—it also shortens your system's lifespan. Bonus tip: Use high-quality filters and set a monthly reminder to check them. 2. Clear Around Your Outdoor Unit Your AC's outdoor condenser unit needs space to "breathe." Leaves, weeds, grass clippings, or even mulch can block airflow and trap heat, making it harder for your system to cool your home. Make sure there’s at least 2 feet of clearance around the unit and gently clean the fins using a garden hose (never a pressure washer). 3. Listen for Unusual Noises or Smells Strange sounds—like grinding, banging, or squealing—could mean that something inside your AC needs attention. Musty odors or burning smells are also red flags. If something doesn’t sound (or smell) right, don’t ignore it—call Native Air before it becomes a bigger problem. 4. Optimize Your Thermostat Settings Set your thermostat to a reasonable temperature—typically around 76–78°F when you’re home—and program it to increase the temp when you’re away. This reduces strain on your AC while maintaining comfort. If you haven’t already, consider upgrading to a smart thermostat to help you save energy and extend your system’s performance. 5. Schedule a Mid-Summer Tune-Up Even if your system seems to be running fine, mid-season is the perfect time for a professional maintenance visit. At Native Air, our AC tune-ups include: Inspecting refrigerant levels Checking electrical connections Cleaning coils and drain lines Testing system performance Identifying early signs of wear Regular maintenance can improve efficiency by up to 15% and help you avoid emergency repairs during peak season. 6. Don’t Forget About Indoor Air Quality With your windows closed and AC running, indoor air can get stale. A clean system paired with UV lights, whole-home air purifiers, or dehumidifiers can drastically improve your home's air quality, reduce allergens, and create a healthier living space for your family. Stay Cool with Native Air in Lowell, NC We’re proud to serve homeowners across Gaston County with honest, reliable HVAC service. Whether you need a quick check-up, a full AC inspection, or just want peace of mind, Native Air has your back. Check out out Air Conditioning service page to see how we can keep your Lowell, NC home cool and comfortable all summer long.
Summer in Gaston County means long days, backyard barbecues, and — unfortunately — higher energy bills. At Native Air, we know how important it is to stay comfortable without draining your wallet. That’s why we’ve put together this list of practical, cost-saving tips to help you lower your energy bills while keeping your home cool all summer long. 1. Schedule a Professional AC Tune-Up One of the best ways to keep your energy bills in check is by ensuring your air conditioning system is running at peak efficiency. A professional tune-up from Native Air can identify small issues before they turn into big problems, optimize airflow, and improve overall performance. Regular maintenance can reduce energy usage by up to 15%! 2. Change Your Air Filters Regularly Dirty or clogged filters restrict airflow, making your HVAC system work harder — and use more energy. We recommend checking your filters every 30–60 days, especially during the summer when your AC runs more frequently. Clean filters not only improve efficiency but also enhance indoor air quality. 3. Use a Smart Thermostat A programmable or smart thermostat allows you to set schedules that align with your daily routine. Raise the temperature a few degrees when you’re not home or asleep, and let the thermostat automatically adjust. Native Air can help install and set up the right thermostat for your home in Lowell or anywhere in Gaston County. 4. Seal Leaky Ductwork and Gaps Leaks in your ductwork or gaps around windows and doors can let cool air escape — and hot air in. Native Air offers duct inspections and sealing services to help keep your conditioned air right where it belongs. Proper sealing can significantly reduce your cooling costs over time. 5. Close Curtains During Peak Sun Hours Sunlight streaming through your windows may look pretty, but it also heats up your home quickly. Keep blinds or curtains closed during the hottest parts of the day, especially on south- and west-facing windows. This small change can lower indoor temperatures and reduce AC usage. 6. Use Ceiling Fans Wisely Ceiling fans don’t cool the air, but they make you feel cooler by circulating it. Run fans counterclockwise during the summer to create a breeze effect, which allows you to raise your thermostat by a few degrees without sacrificing comfort. 7. Consider an Energy-Efficient Upgrade If your HVAC system is more than 10–15 years old, it might be time to upgrade to a more energy-efficient model. Native Air offers high-efficiency air conditioners and heat pumps tailored to the specific climate needs of homes in Gaston County. We can help you determine the right solution for your budget and comfort goals. Check out our air conditioner product page to learn about some of the energy efficient cooling products we carry and install here at Native Air in Lowell, NC. Let Native Air Help You Stay Cool and Save At Native Air, we’re proud to help our neighbors in Lowell, Gastonia, Belmont, and all across Gaston County keep their homes cool while saving money. Whether you need a summer AC tune-up, thermostat upgrade, or full system replacement, our friendly HVAC team is here to help. Contact us today to schedule your service or get a free estimate — and take control of your summer energy bills the smart way!
Spring is the perfect time to give your HVAC system some attention before the hot summer months arrive. While the weather in Lowell, NC, is still mild, it’s important to make sure your air conditioner is in good shape. You don’t want to wait until the heat of summer to find out your AC is malfunctioning! At Native Air, we’ve seen it all when it comes to air conditioning problems, and we want to help you catch any issues before they turn into costly repairs. Here are some common signs your air conditioner might need repair this spring. 1. Your AC Isn’t Blowing Cool Air One of the most obvious signs that your air conditioner needs attention is if it’s not blowing cold air. If your unit is running but the air coming from the vents is warm or lukewarm, this could indicate an issue with the refrigerant or the compressor. This is a problem that should be addressed right away to prevent further damage. 2. Strange Noises Coming from the Unit If your air conditioner is making unusual sounds such as grinding, squealing, or rattling, it could mean there’s an issue with a fan, belt, or another internal component. While some noise is normal, loud or unusual sounds can be a sign of something more serious that could lead to a breakdown. 3. Water Leaks Around the AC Unit AC units produce condensation, but if you notice water pooling around your system, there may be a drainage issue or a refrigerant leak. Both of these problems can cause significant damage to your system and your home if not addressed in time. 4. Weak Airflow or Poor Circulation If the airflow from your AC is weak, or if certain areas of your home aren’t cooling down properly, this could indicate clogged filters, a malfunctioning blower fan, or ductwork issues. Low airflow puts additional strain on your AC, making it work harder and leading to higher energy bills. 5. Increased Energy Bills Have your energy bills been steadily increasing, even though your usage hasn’t changed? An inefficient air conditioner can cause your utility bills to spike. If your AC unit is older or running inefficiently, it could be using more energy than necessary to cool your home. Regular maintenance or repairs could help bring those costs down. 6. Foul or Musty Odors from the Vents If you notice unpleasant odors, like a musty smell or burning scent, coming from your air vents, something is wrong with your system. A musty smell could indicate mold or mildew growing in the ductwork or around the evaporator coils. A burning smell could be a sign of an electrical issue or overheating, which is a serious concern. 7. The AC Unit Is Constantly Cycling On and Off If your air conditioner keeps turning on and off in short bursts, this is known as short-cycling. It could be caused by a malfunctioning thermostat, clogged filters, or a refrigerant issue. This not only affects your comfort but also increases wear and tear on the system, leading to potential breakdowns. 8. Your Thermostat Isn’t Responding If your thermostat is acting up—whether it’s not displaying the correct temperature or it’s unresponsive—it could be a sign of a deeper issue. Your thermostat controls the cooling cycles, and problems here could lead to inconsistent temperatures and energy inefficiency. Why You Should Address AC Problems Now If you notice any of these signs, it’s best to schedule a service call with Native Air right away. Taking care of repairs in the spring before the summer heat hits will ensure your AC system is ready to keep you cool and comfortable all season long. Plus, addressing problems early can help you avoid costly repairs or even a complete system replacement. Ready to Schedule an AC Repair in Lowell, NC? Don’t wait until your AC breaks down in the middle of summer! At Native Air, we specialize in AC repairs, maintenance, and installations in Lowell, NC, and surrounding areas. Our experienced technicians will diagnose the problem quickly and get your system running smoothly again. Contact us today to schedule your spring AC inspection or repair! Check out our air conditioning service page to learn more about how we can keep your Lowell, NC home cool and comfortable all spring and summer long.
As energy costs continue to rise, homeowners in Lowell, NC, are looking for ways to save money on their utility bills without sacrificing comfort. One of the best investments you can make is upgrading to a high-efficiency air conditioning system. At Native Air, we specialize in helping our customers choose and install energy-efficient AC systems that provide long-term savings. Here’s how upgrading your AC can put more money back in your pocket. Lower Energy Bills High-efficiency AC systems use advanced technology to cool your home using less energy. Units with a higher SEER (Seasonal Energy Efficiency Ratio) rating consume significantly less electricity than older models. If your current system is over 10 years old, upgrading to a new high-efficiency unit can reduce your energy bills by up to 30-50%. Fewer Repairs and Maintenance Costs Older air conditioning systems require frequent repairs and maintenance, which can add up over time. High-efficiency models are designed with better components, reducing the likelihood of breakdowns. Plus, many new systems come with extended warranties, meaning fewer out-of-pocket expenses for repairs. Rebates and Incentives Homeowners in North Carolina may qualify for rebates and tax incentives when they upgrade to an energy-efficient AC system. Many utility companies offer incentives for installing high-SEER-rated units, helping to offset the initial cost of the upgrade. Increased Home Value Investing in a high-efficiency AC system not only saves you money but also increases your home's value. If you plan to sell your home in the future, potential buyers will appreciate the energy savings and modern HVAC technology, making your property more attractive on the market. Better Indoor Comfort High-efficiency air conditioning systems offer improved humidity control, more consistent temperatures, and quieter operation. These features contribute to a more comfortable home while also reducing wear and tear on the system, further extending its lifespan. Make the Switch Today with Native Air At Native Air, we understand that upgrading your AC system is a significant investment, but the long-term savings make it well worth it. Our team of HVAC experts can help you choose the right high-efficiency system for your home and budget. Contact us today to learn more about our AC installation services and start saving money on your energy bills! Check out our air conditioner products page to learn more about some of the energy efficient cooling systems we carry and install here at Native Air.
As the chill of winter fades and the warm, sunny days of spring approach, it’s the perfect time to get your HVAC system ready for the heat of summer. Proper spring maintenance ensures your air conditioner is running efficiently, keeping your home cool and comfortable when you need it most. Here are some essential tips to prepare your HVAC system for the warmer months ahead. 1. Change the Air Filters One of the easiest yet most important tasks is changing your air filters. Clogged or dirty filters restrict airflow and cause your system to work harder, leading to higher energy bills and reduced efficiency. Depending on your usage and the type of filter, it’s a good idea to replace it every 1-3 months to maintain optimal airflow and indoor air quality. 2. Clean the Coils Over time, dirt and debris can accumulate on your evaporator and condenser coils, which can significantly reduce the efficiency of your air conditioner. Cleaning these coils can prevent the system from overheating and help it run more smoothly. If you’re not sure how to do this yourself, a professional technician from Native Air, Inc. can handle the cleaning for you during a routine service. 3. Inspect the Condensate Drain The condensate drain is responsible for removing the moisture that your air conditioner collects during the cooling process. If this drain is clogged, it can lead to water damage and mold growth in your system. Ensure the drain is clear and functioning properly, and if you notice any issues, call us for help. 4. Check the Thermostat Before the heat arrives, make sure your thermostat is in good working order. If you have a programmable thermostat, this is the time to adjust the settings to match your cooling needs. If your thermostat is malfunctioning, it could be causing your system to run inefficiently or not reach the desired temperature. Consider upgrading to a smart thermostat for more precise control and energy savings. 5. Examine the Ductwork Leaky ducts can lead to wasted energy and uneven cooling. Inspect your ductwork for visible signs of wear and tear, and ensure there are no obstructions or leaks. If you find any issues, professional sealing and insulation services can help improve efficiency and reduce energy costs. 6. Test Your System Turn on your air conditioning system before the weather gets too hot to ensure it’s working properly. Listen for any unusual noises and pay attention to the airflow and temperature. If you notice anything off, it’s better to address it sooner rather than waiting for a breakdown during the hottest months of the year. 7. Schedule a Professional Tune-Up While there are several tasks you can handle yourself, scheduling a professional HVAC maintenance tune-up is always a smart move. A certified technician from Native Air, Inc. can inspect your entire system, clean components, check for any potential issues, and make sure everything is running as efficiently as possible. Regular professional maintenance helps extend the life of your system and ensures your home stays cool all summer long. Check out our air conditioning maintenance page to learn more about our professional service. Spring HVAC maintenance is an essential step in preparing your system for the upcoming heat. By taking care of these tasks, you’ll not only enhance the performance and longevity of your system but also enjoy more energy-efficient cooling. If you need assistance or would like to schedule a professional tune-up, don’t hesitate to contact Native Air, Inc. in Lowell, NC. Our team is here to keep your home comfortable year-round! Ready to get your HVAC system spring-ready? Call Native Air, Inc. today at 704-824-0380 to schedule your tune-up!
Winter in North Carolina can bring chilly temperatures, making a well-functioning furnace essential for comfort and safety. If your heating system starts acting up, ignoring the warning signs can lead to costly repairs—or worse, a complete breakdown when you need it most. Here are some key indicators that your furnace needs immediate attention: 1. Unusual Noises While some noise from your furnace is normal, loud bangs, rattles, or screeching sounds are not. These could indicate loose components, a failing blower motor, or ignition problems. 2. Weak or No Airflow If your vents are barely pushing out warm air, it could mean a clogged filter, blower motor issues, or ductwork problems. Poor airflow reduces efficiency and makes it harder to keep your home warm. 3. Frequent Cycling Does your furnace turn on and off more frequently than usual? This short cycling may be due to an overheating issue, thermostat malfunctions, or a clogged filter that needs immediate attention. 4. Uneven Heating Cold spots in your home indicate that your furnace isn’t distributing heat properly. Leaky ducts, a malfunctioning thermostat, or a struggling furnace could be to blame. 5. A Sudden Increase in Energy Bills If your heating bill has unexpectedly spiked, your furnace could be overworking due to dirty filters, failing components, or efficiency issues. Addressing the problem early can save you money in the long run. 6. Yellow or Flickering Pilot Light A healthy furnace flame should be blue. A yellow or flickering flame can signal a carbon monoxide issue, which is a serious safety hazard. If you notice this, turn off your furnace immediately and call for professional service. 7. Strange Smells A persistent burning smell could indicate electrical issues, while a rotten egg smell suggests a gas leak. If you smell gas, evacuate your home and call your gas company immediately. 8. Excessive Dust or Poor Air Quality If your home is dustier than usual, your furnace might not be filtering air properly. Dirty filters and malfunctioning components can circulate allergens and pollutants throughout your home. 9. Difficulty Starting the Furnace If you have to restart your furnace multiple times or it struggles to turn on, this could point to an electrical issue, a faulty thermostat, or a failing ignition system. Call Native Air for Fast Furnace Repairs Don’t wait until your furnace stops working completely—address issues as soon as they arise! At Native Air, we provide expert furnace repair services to keep your home warm and comfortable all winter long. Call us today to schedule a service appointment and ensure your heating system is running at peak performance. 📞 Contact Native Air in Lowell, NC, for expert furnace repairs!
Winter in Lowell, NC, brings chilly temperatures, making your HVAC system essential for keeping your home warm and comfortable. However, even the most reliable systems can occasionally experience hiccups. While some issues require professional attention, there are several common problems you can troubleshoot yourself. 1. No Heat or Insufficient Heating If your system isn’t providing enough heat: Check the thermostat: Ensure it’s set to “heat” mode and the temperature is higher than the current room temperature. Inspect the air filter: A dirty filter can restrict airflow and reduce efficiency. Replace it if it’s clogged. Check power sources: Verify the system is receiving power by inspecting the circuit breaker and power switch. 2. Uneven Heating Across Rooms Cold spots can make your home uncomfortable. Check vents and registers: Ensure all vents are open and unobstructed by furniture or curtains. Inspect ductwork: Look for any visible damage or leaks that may cause uneven heating. Consider zoning: If uneven heating persists, consult Native Air, Inc. about adding a zoning system to your HVAC setup. 3. Unusual Noises Loud or unusual sounds from your HVAC system can be concerning. Banging or clanking: This may indicate loose or broken components in the blower or motor. Whistling or hissing: Check for gaps in ductwork or loose connections that might allow air to escape. Solution: Turn off the system and call our professionals to prevent further damage. 4. Frequent Cycling If your HVAC system is turning on and off frequently: Inspect the air filter: A dirty filter can force the system to overwork, leading to short cycling. Check thermostat placement: If your thermostat is near a heat source (like a fireplace), it may misread the temperature. Consider system size: An improperly sized HVAC system can cause frequent cycling. Call us to evaluate if your unit is suitable for your home. 5. Frost on Heat Pump It’s normal for heat pumps to develop a thin layer of frost, but excessive ice can be problematic. Clear debris: Ensure nothing is blocking the outdoor unit, such as leaves or snow. Check defrost mode: If the system isn’t defrosting properly, schedule a service call. Keep the unit clear: Maintain at least two feet of clearance around your heat pump for proper airflow. When to Call the Pros While many HVAC issues can be resolved with basic troubleshooting, some require expert attention. If you’ve tried the above steps without success—or if you notice leaks, persistent odors, or a sudden spike in energy bills—it’s time to contact Native Air, Inc. Our experienced technicians in Lowell, NC, are here to keep your system running smoothly all winter long. With timely repairs, preventative maintenance, and expert advice, we’ll ensure your home stays warm and comfortable no matter how cold it gets. Don’t let HVAC problems disrupt your winter comfort. Call Native Air, Inc. at 704-824-0380 or schedule an appointment online to get the help you need.
When the temperature drops in Lowell, NC, having a functioning heating system isn’t just a luxury—it’s a necessity. But what happens when your heating system suddenly stops working? Knowing what steps to take can make all the difference in staying safe and comfortable while addressing the issue. At Native Air, we’re here to guide you through this stressful situation with practical advice and prompt emergency HVAC services. Step 1: Check the Basics Before assuming the worst, start with a quick check of common issues: Thermostat Settings : Ensure your thermostat is set to “heat” and the temperature is set higher than the current room temperature. Power Supply : Check that your HVAC system is getting power. Look for tripped circuit breakers or blown fuses. Air Filters : Clogged filters can restrict airflow and cause your heating system to shut down. Replace dirty filters to see if this resolves the issue. Step 2: Look for Obvious Problems Inspect your heating system for visible signs of trouble, such as: Unusual Noises : Banging, rattling, or humming sounds could indicate mechanical issues. Burning Smells : A smoky or electrical smell may signal a serious problem. Turn off your system and call a professional immediately. Blocked Vents : Ensure that furniture or debris isn’t obstructing your vents, which can impact performance. Step 3: Avoid DIY Repairs While it’s tempting to troubleshoot on your own, heating systems are complex and potentially dangerous if mishandled. DIY fixes can lead to more damage or even safety hazards. It’s always best to call a licensed professional, like our team at Native Air, for accurate diagnostics and repairs. Step 4: Contact an Emergency HVAC Technician When basic troubleshooting doesn’t solve the problem, it’s time to call the experts. At Native Air, we offer 24/7 emergency heating repair services for Lowell and the surrounding areas. Our experienced technicians will quickly diagnose the issue and restore your home’s comfort as soon as possible. Step 5: Stay Warm While You Wait While waiting for your HVAC professional to arrive, take steps to keep your family warm: Layer Up : Wear warm clothing and use blankets to stay cozy. Space Heaters : Use portable heaters, but follow safety guidelines to prevent fire risks. Seal Drafts : Use towels or weather stripping to block cold air from entering through windows and doors. Prevent Future Heating Failures The best way to avoid heating emergencies is through regular maintenance. Schedule annual tune-ups with Native Air to ensure your system runs smoothly throughout the cold season. Proactive care can catch small problems before they become major breakdowns. Why Choose Native Air for Emergency Repairs? At Native Air, we understand the urgency of a heating emergency. Our team is dedicated to providing fast, reliable, and professional service when you need it most. We’re proud to serve Lowell, NC, and the surrounding areas with top-notch HVAC solutions tailored to your needs. Don’t let a heating issue leave you in the cold! Contact Native Air at 704-824-0380 or visit our contact us page for expert emergency HVAC repairs. Stay warm and safe this winter with the help of our trusted team.
As the temperatures drop this winter, you may notice your energy bills climbing. Heating your home can account for a large portion of your monthly expenses, but there are steps you can take to reduce your energy usage without sacrificing comfort. At Native Air, Inc., we want to help you stay warm and save money during the colder months. Here are some effective tips to lower your heating costs this winter: 1. Schedule a Heating System Maintenance Check Before you crank up the heat, make sure your HVAC system is ready for the cold weather. A well-maintained furnace or heat pump runs more efficiently, which means it uses less energy. Schedule a professional maintenance service to clean the system, replace filters, and inspect components for any issues that could lead to higher energy use. Regular maintenance also extends the life of your system, saving you money in the long run. 2. Seal Drafts and Insulate Your Home Cold air entering through gaps and cracks can significantly increase your heating costs. Seal around windows and doors with weatherstripping or caulking to prevent heat from escaping. Adding insulation to attics, basements, and walls helps keep warm air inside and cold air out. The better your home is insulated, the less your heating system has to work to maintain a comfortable temperature. 3. Use a Programmable Thermostat One of the easiest ways to save on heating costs is by using a programmable thermostat. By setting your thermostat to lower the temperature when you’re away or asleep, you can reduce your energy usage without sacrificing comfort. For every degree you lower your thermostat, you can save about 1% on your heating bill. 4. Keep Your Thermostat at a Lower, Consistent Temperature While it’s tempting to keep your home warm and toasty, lowering your thermostat to a cooler setting (around 68°F during the day and 60-65°F at night) can make a noticeable difference in your energy bills. If you’re comfortable, consider wearing layers of clothing to keep warm instead of turning up the heat. 5. Upgrade to Energy-Efficient Heating Equipment If your HVAC system is old and inefficient, it might be time for an upgrade. Newer models of furnaces and heat pumps are designed to be more energy-efficient and can help you save money over time. If you’re unsure about the best option for your home, our experts at Native Air, Inc. can help you choose and install a system that fits your needs and budget. 6. Utilize Ceiling Fans Ceiling fans aren’t just for summer! In the winter, set your ceiling fans to rotate clockwise at a low speed. This will push the warm air that rises back down into the living space, making your home feel warmer and allowing you to lower your thermostat setting. 7. Close Unused Vents and Doors If you have rooms that aren’t used frequently, close the vents and doors to those areas. This forces the warm air into the rooms you use most, which can improve heating efficiency. Just be sure not to block vents in rooms that need to remain heated to avoid putting strain on your HVAC system. 8. Take Advantage of the Sun During the day, open curtains and blinds to let sunlight naturally warm your home. Once the sun sets, close them to trap the heat inside. This simple strategy can make a noticeable difference in your home’s temperature and your energy consumption. 9. Use Space Heaters Wisely If you only need to heat one or two rooms, consider using a space heater instead of cranking up the thermostat for the whole house. Be sure to use space heaters safely and never leave them unattended. 10. Consider Zone Heating If your home has multiple levels or larger rooms, zone heating can be an excellent option. You can install dampers in your ducts to control the flow of air and heat specific areas of the home, rather than heating the entire space. Zone heating allows you to focus energy where it's most needed. Reducing your heating costs this winter doesn’t have to be complicated. By following these tips, you can enjoy a warm, cozy home without breaking the bank. At Native Air, Inc., we’re committed to helping you keep your energy bills under control. If you need assistance with maintenance, repairs, or an upgrade to a more efficient system, contact us today! Stay warm and save money this winter with expert services from your trusted HVAC team in Lowell, NC. To learn more about how the Native Air team can keep your home warm and comfortable this winter, check out our heating service page today!